You can use the provided 3M tape for smooth, clean surfaces. Apply tape to the bracket first, then to the wall. Press firmly to secure it.

For rough surfaces, we recommend using screws to mount the doorbell.

Clean the mounting surface. Apply the double-sided tape to the back of the bracket, then press the bracket firmly onto the wall until it adheres completely.

Place the bracket at the desired location and mark the screw holes.

Drill holes, insert the wall anchors (expansion bolts), and secure the bracket with the screws provided.

After securing the bracket, snap the doorbell in from bottom to top as shown. To remove the doorbell, insert the removal pin into the hole at the top.